Latest centrifugal blower Tenders | Government centrifugal blower Tenders

CTN :45728130

02 Jul, 2026 NA

Liluah - West Bengal

Tender For double inlet centrifugal blower fan complete with mounting brackets suitable for 415v, 3 phase, 50 hz supply conforming to rcf specification no. edts-331(rev-'a') corrigendum 1. [ warranty period: 30 months after the date of delivery ] ]

CTN :45712978

07 Jul, 2026 1.75 Lacs

Parganas - West Bengal

Tender For supply of booster and mc assy rhd , abs unit , assy evaporator coil , bezel assy front rh , bezel assy front lh , transponder and rf key , armature assy , rear shock absorber , engine mounting arm rh , assy lower wishbone complete rh , assy lower wishbone complete lh , blower assy , assy blower motor , hose discharge assy , hose suction assy , sensor wheel speed rear , sensor wheel speed front , compressor assy , assy condenser complete , ac gas 134a can

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

Central Government/Public Sector

CTN :45681892

07 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of spares for roof mounted cab ac of daulat ram engg make for 3 phase locomotive, set consists of 07 items as given below : roof mounted cab ac specification rdso/2007/el/specn /0055 rev 2. 1) blower runner - 06 nos 2.) hp cut out - 02 nos. 3.) lp cut out - 04 nos. 4.) frp blade - 10 nos. 5) condenser evaporator - 01 no .6) auxiliary add on block for mpcb -10 nos. 7) returen air filter - 25 nos. make : daulat ram engg only. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45692458

15 Jul, 2026 75.91 Lacs

Panaji - Goa

Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r

State Government

CTN :45455477

06 Jul, 2026 29.66 Lacs

Bidar - Karnataka

Tender For corrigendum : supply of equipments & goods to veterinary college, bidar - table top weighing scale (call-2), platform weighing scale (call-2), mixer grinder (call-2), tilting grinder (call-2), exhaust system installation charges (call-2), mug starter for blower (call-2), gi ducting (call-2), ss filters (call-2), exhaust hood (call-2), centrifugal blower (call-2), three sink unit with splash back (call-2), insect killer (call-2), coconut scrapper with stand (call-2), onion/potato bin (call-2), stainless steel rack of 5 shelves (call-2), spoon sterilizer(call-2), two shelves trolley (call-2), platform trolley (call-2), hood type dishwasher (call-2), four vessel bain marie with tray slide (call-2), vegetable cutting machine with 6 nos. blades (call-2), four door reach in freezer (call-2), water dispenser with in built uv purifier - cold, normal and hot 3 taps (call-2), dough ball making machine (call-2), semi automatic chapathi making machine (800-1000/hour) (call-2), semi automatic chapathi making machine (500 - 600/hr) (call-2), dosa tawa (call-2), two burner cooking range (call-2), single burner bulk cooking range (call-2), steam system installation charges (call-2), ss ball valve 3/4 in (call-2), steam pipe line (call-2), idli box with stand (call-2), sambar vessel with stand (call-2), rice vessel with stand (call-2), steam boiler call-2

Central Government/Public Sector

CTN :45634832

06 Jul, 2026 NA

Bokaro - Jharkhand

Tender For centrifugal blower, mm: 100.06c, 09.9000032

Central Government/Public Sector

CTN :45638006

20 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of blower(evaporator) runners 'a' type-01 no, 'b' type -01 no made of stainless steel size:250x150mm suitable for fedders lloyd /leel make rmpus as per fedders lloyd part no.flc-rly- 037 or leel part no.leel/rly/10063". [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638463

30 Jun, 2026 NA

Mysore - Karnataka

Tender For centrifugal blower double inlet complete with fan motor. suitable for exhaust fan in lhbtype ac coaches, as per rcf spec. edts-331 rev-nil, corr 3 or latest, scope of supply type-1 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Centrifugal Blower Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector